| Civil War Union Naval Vessels: |
|
Model |
Description |
Price |
Photo |
| CIW1 |
USS Monitor
1/48 scale ship is 43"/10.5",5"
turret, and comes with top, bottom, turret, rudder, motor/servo
emplacement, hold downs, smoke stacks, ABS cement, instructions on how to
set up for combat play. Actual ship: 172' x 41'; 2 - 11"
Dahlgrens
|
$120.00
|



|
| CIW2 |
USS Cairo
(also can represent other vessels in same class:
Corondelet, Cincinnati , Louisville, Mound City, Pittsburgh,and St.
Louis).
1/48 scale ship is 43"/14" and comes with top, bottom,
rudder,smoke stacks, ventilation intakes, two boats, ABS cement,
motor/servo mount, hold downs, and instructions for combat play setup,
actual ship: 175' x 51'; 3 - 8" Dahlgrens; 6 - 32# smoothbores; 4 -
42# rifles
|
$140.00 |
 |
| CIW3 |
USS Osage (1863)
(Neosho)
1/48 scale ship is
40"/10.5" and comes with top, bottom, Smoke stack, rudder,
motor/servo mount, ABS cement, two life boats, hold downs, and
instructions for combat play setup. Actual ship: 180' x 45'; 2 - 11'
Dahlgren smoothbores
|
$120.00 |
 |
| CIW4 |
Fort Sumpter
Approximately 16" to 21" per side and comes in two
wall sections, with ABS cement and instructions for combat setup and play.
|
$60.00 |
 |
| CIW5 |
USS Choctaw
1/48 scale ship comes with top and bottom
sections, smoke stacks, rudder, ventilation intakes, two life boats,
motor/servo mounts, ABS cement, and set up instructions for combat
play. Actual ship: 260'/45', 100pdr-r, 3-9"sb, 2-30pdr-r, 2-24
pdr
|
$200.00 |
 |
| Civil War
Confederate Naval Vessels: |
|
Model |
Description |
Price |
Photo |
| CIW6 |
CSS Albemarle
1/48 scale ship is 39"/8.5" and comes with a steam launch
9.5/2.75 top, bottom, rudder, motor/servo mount,hold downs, ABS cement,
and instructions for set up for combat play. Actual ship: 158' x
35', 2 - 6.4" Brookline rifles. The CSS
Neuse (1864) was similar in design. |
$95.00 |
 |
| CIW7 |
CSS David
(Confederate Torpedo Boat) (1/32 scale)
This was the South's attempt at underwater warfare producing a semi-submergible
spar torpedo boat. Its method of attack involved using an explosive charge
attached to a long pole on its bow. This model is being produced in 1/32
scale rather than 1/48 scale in order to be able to use radio control. 50
x 6 spar torpedo. The David is 19"/2.75" and comes with
hull, rudder, top, ABS cement, and instructions for setup for combat play. |
$50.00 |

|
| CIW8 |
CSS Virginia
(Merrimack)
The Virigina is 68.5" x 12.5" and comes with top, bottom,
smoke stack, air vents, hold downs, 2 life boats, ABS cement, motor/servo
emplacement, and instructions on how to set up for combat play.
Actual ship: 275" x 50", 4 - 7", 2 - 6.4", 6 - 9"
Dahlgrens. |
$210.00 |
 |
| CIW9 |
CSS Atlanta
CSS Atlanta- was originally the English blockade runner Fingal (1861)
which was purchased and converted into a Confederate ram (1862). On
6/17/63 she was captured by the US monitors Weehawken and Nahant and was
later recommissioned the USS Atlanta. 204'/41', 2-7"r, 2-6.4"r
The Atlanta comes with top, bottom, smoke stack, rudder, motor/servo
emplacement, hold downs, ABS cement, and set up instructions. |
$140.00 |
 |
| CIW10 |
Blockade Runner
This is a model (1/48 scale) of a typical blockade runner with side
paddle wheels designed for high speed (15 - 16 knots). With a low
silhouette and high speed they would outrun blockading squadrons.
Smuggling in goods was incredibly profitable and one successful trip could
pay for the ship. Model measures 55" x 8". Actual
ship: 220' x 32', no armourment.
The Blockade Runner comes with bottom hull, deck, 2 smoke stacks, life
boat, masts, deck cabin, A.B.S. cement, motor/servo emplacement, and
instructions for combat set up. |
$150.00 |
 |
| Revolutionary
War Naval Vessels: |
|
Model |
Description |
Price |
Photo |
| CIW11 |
USS Constellation
The USS Constellation was built in 1797 as a frigate in the new US
navy. She served during many encounters in the War of 1812.
164 x 40 , 36 guns. |
$160.00 |
 |
| Accessories: |
| CIW-A1 |
Steam Launch Hull 10"
X 3" |
$5.00 |
 |
| CIW-A2 |
Steam Launch Hull 10"
X 3" |
$7.00 |
| CIW-A3 |
Chain $1.00 per foot |
$1.00 |
| CIW-A4 |
Cutter Hull 8"
X2.5" |
$4.00 |
| CIW-A5 |
Cutter Hull with Seats 8"
X2.5" |
$5.00 |
| CIW-A6 |
Flat Back Cutter 8"
X2.5" |
$4.00 |
| CIW-A7 |
Gig Hull 6.5" X
2" |
$3.50 |
| CIW-A8 |
Gig Hull 6.5" X
2" |
$3.50 |
| CIW-A9 |
Gig Hull with Tarp
6.5" X 2" |
$4.00 |