As with most of our kits, this building can be basically glued together and ready to paint and detail in about 15 minutes.
Figure not included.
Diorama Accessories:
Dioramas Plus
1/35 Scale diorama architectural kits & accessories - Made in USA
Cast in hydrocal (hard plaster), some kits complimented with laser cut wood doors/windows/acrylic glass. Hydrocal holds detail well & paints or stains very realistically! Manufacturer recommends 5 minute epoxy to glue parts together.
Back to Groundwork & Diorama Aids Index
<-Go back to scenic figure bases index page
Click on thumbnail photo to view larger photo
|
Model |
Description | Price | Photo |
| DP3 | Sneak Attack 1/35 scale hydrocal cast kit.
This 1/35 Scale kit features four beautifully detailed hydrocal plaster castings, laser cut wood windows and shattered glass, posters, cast rubble piles and bricks and full color, easy to understand painting and aging instructions. Very simple construction. Simple model design can be glued together and ready to paint and detail in about 15 minutes. 12″ x 9″ x 12″ tall. Base, tank or figures not included |
$45.95
|
 |
| DP10 | Brick sidewalk set 1/35 scale hydrocal cast
kit.
These 1/35 Scale sidewalks feature beautifully detailed hydrocal plaster castings and full color, easy to understand painting and aging instructions. You get three straight sections and two corners in each set. Each straight section is 1 1/2″ wide x 8″ long. Great detail. |
$19.95
|
 |
| DP11 | Laser cut shattered glass 1/35 scale hydrocal
cast kit.
This laser cut acetate perfectly replicates the shattered glass seen in war ravaged buildings without the hassle of having to hand cut it all. A simple, great looking detail that is not often seen in dioramas. You get one 3″ x 11″ sheet, which should be enough to do many dioramas. Simply trim to fit with scissors and glue in place. Clear, but shown here against a sheet of black construction paper for clarity. |
$6.95
|
 |
| DP12 | Three story apartment building 1/35 scale
hydrocal cast kit.
This kit features beautifully detailed hydrocal plaster castings, laser cut shattered glass, mangled rebar, cast rubble & bricks and full color, easy to understand painting and aging instructions. Easy assembly, ready to paint in about 15 minutes. Approximately 12″ x 8″ x 11″ tall. Base & tank not included. |
$44.95
|
 |
| DP13 | "To Trains" 1/35 scale hydrocal cast
kit.
This kit features beautifully detailed hydrocal plaster castings including cobblestone base, vintage signs and full color, easy to understand painting and aging instructions. Easy assembly, ready to paint in about 15 minutes. Approximately 8″ x 5 1/2″. Figures not included. |
$19.95
|
 |
| DP14 | Last Stand 1/35 scale hydrocal cast kit.
This kit features beautifully detailed hydrocal plaster castings including a cobblestone base, cast rubble & bricks and full color, easy to understand painting and aging instructions. Easy assembly, ready to paint in about 15 minutes. Approximately 8″ x 5 1/2″. Figure not included |
$24.95
|
 |
| DP17 | Juno Beach House 1/35 scale hydrocal cast kit.
Most of this kit was mastered by Glenn Bartolotti & is based on one of the houses often seen in photos from D Day.
The kit, which features an 8 1/2″ x 10 1/2″ base , would be a
great starting point for any D-Day diorama.
As with most of our kits, this building can be basically glued together and ready to paint and detail in about 15 minutes. Figure not included. |
$64.95
|
 |
| DP19 | Italian Street Scene 1/35 scale hydrocal cast kit.
Not only does this kit feature laser cut windows and door, great brick detail & rubble, it also has a very cool base that models an incline, which isn't often seen in dioramas but really adds interest to the scene.
This kit features an 8″ x 10 1/2″ base which models an
incline, something that is rarely seen in a diorama. Also
included are beautifully detailed hydrocal castings, laser cut
wood door and windows, laser cut shattered glass, cast rubble
& bricks and complete, easy to understand painting and aging
instructions.
As with most of our kits the basic diorama can be glued together and ready to paint in about 15 minutes. Figures/vehicles not included. |
$49.95
|
 |
Back to Groundwork & Diorama Aids Index
<-Go back to scenic figure bases index page