Step
Photo
Do you want to obtain Color Water? Insert ENAMEL Paint into Mixed 1 Hour Water Effect before Mix
Mixture Ratio RESIN : HARDNER = 200% : 100%
Groundwork & Diorama Aids:
Scalerama (Korea)
New groundwork line ideal for 1/32 (54-mm) and 1/35 (48 mm) scales.
Back to Scalerama Step by Step Instructions Index
Back to Groundwork & Diorama Aids Index
Step-by-Step Instructions Scalerama Water Effect Page 1
Go to Scalerama Water Effect Instructions Page 2->
The Scalerama diorama products line is very easy to use. The products come with application instructions, and the table of contents listed below is a great addition to these instructions. Each product contains descriptions & photos with step by step instructions on how to use the various products, and also how to create special effects.
A. Step by Step: application of One Hour Water Effect on diorama/figure base: (click on photo to see larger photo)
|
Step |
Description |
Photo |
| Step 1 | Mix 1 hour Water Effect & Coat the edge of Diorama
Base |
|
| Step 2 | Arrange your Model |
|
| Step 3 | Pour Mixed 1 Hour Water Effect Do you want to obtain Color Water? Insert ENAMEL Paint into Mixed 1 Hour Water Effect before Mix Mixture Ratio RESIN : HARDNER = 200% : 100% |
|
| Step 4 | The finished diorama! | |
B. Step by Step: application of Twelve Hour Water Effect on diorama/figure base: (click on photo to see larger photo)
| Step | Description | Photo |
| Step 1 | Mix
the 12 Hour water Effect with ratio of
two to one, resin to hardener |
 |
| Step 2 | Pour Mixed 12 Hours Water Effect
Do you want to obtain Color Water? Mix ENAMEL Paint into Mixed 12
Hours Water Effect (after mixing water Effect first) |
 |
| Step 3 | Finished Work (100% Crystal Clear, No Shrinking, No
Bubbles, No Yellowing!) |
 |
C. Step by Step: creation of Splashing Water Effect (12 Hour) on diorama/figure base: (click on photo to see larger photo)
| Step | Description | Photo |
| Step 1 | Prepare Clear PET Bottle (plastic water bottle) . and make
splashing water shapes
|
 |
| Step 2 | Attach to base. |
 |
| Step 3 | Paint Mixed Splashing Water Effect Mixture Ratio
RESIN : HARDENER : EFFECTOR = 200% : 100% : 2~3points |
 |
| Step 4 | Do you want to make a more colorful Splashing Water Effect?
Add Enamel Paint into Mixed Splashing Water Effect before it begins
to set. |
 |
| Step 5 | The finished diorama! |  |
More photos of various dioramas
with Splashing Water effect: 
 |
||
D. Step by Step: building a 1/35th scale waterfall: (click on photo to see larger photo)
| Step | Description | Photo |
| Step 1 | To make Large scale waterfall Stream frame, use clear PET plastic water
bottle (or plastic plate). Cut
& make frame shape with scissors (see red arrows in photo). |
 |
| Step 2 | Mix Splashing Water Effect with ratio of 200% resin
with 100% of the volume with Hardener & 2-3 drops of Point
Effector. Apply this mixture
on the clear plastic frames with paint brush.
Clean brush with lacquer thinner after complete. |
 |
| Step 3 | Mix Splashing Water Effect 200% volume of Resin with 100% volume of
hardener & 2-3 drops of Points Effector.
Mix in some white enamel paint to make the white streams and apply
to the water fall where appropriate. |
|
| Step 4 | Finished diorama photos! |  |
More photos of finished
waterfall diorama:
 |
||
Click here to order Water Effect products
Go to Scalerama Water Effect Instructions Page 2->
Back to Scalerama Step by Step Instructions Index
Back to Groundwork & Diorama Aids Index
