Groundwork & Diorama Aids:
Scalerama (Korea)
Scale Diorama Model Supplies: Water Effect
<-Back to Scalerama Index Page
Back to Groundwork & Diorama Aids Index
|
Model |
Description | Price | Photo |
| SC-00-142 | Twelve Hour Water Effect. Set
contains resin (100 ml jar); hardener (50 ml bottle); measuring cup;
mixing spoon; instructions. Also contains "Effector"
which is mixed with 12 Hour Water Effect to create a gel-like material for
sculpting water splashes, waves, etc.
Mix two together at 2:1 ratio. Product sets in about 12 hours & dries to a crystal-clear, non-yellowing finish. Can be colored by mixing in enamel paint to achieve the desired water effect (such as muddy water, puddles, ocean water, etc.) Waves & ripples can be sculpted into surface before product sets. Can also be used to create calm water. Works with any scale. (former model #SC0004). Photo of product used in diorama: Temporarily out of stock |
$14.00
|
 |
| SC0005 | One Hour Water Effect. Set contains resin
(120 ml jar); hardener (60 ml bottle); measuring cup; mixing spoon;
instructions. Mix two together at 2:1 ratio. Product sets in
about 1 hours & dries to a crystal-clear, non-yellowing finish. Can be
colored by mixing in enamel paint to achieve the desired water effect
(such as muddy water, puddles, ocean water, etc.) Works with any
scale.
(SC-00-143) Photo of product used in diorama: temporarily out of stock |
$14.00
|
 |
| SC-00-145 | Twelve Hour Splashing Water Effect.
Set contains clear resin (100 ml bottle), clear hardener (50 ml bottle),
measuring cup, mixing spoon, instructions & bottle of Effector ( a
liquid that gets mixed with the resin & hardener and changes
consistency to a thick gel, which can be sculpted to create splashing
water). This small brown bottle is included in this set & not
shown in photo.
Mix resin & hardener together at 2:1 ratio. Mix in a few drops of the Effector, and stir to a gel-like consistency. Product sets in about 12 hours & dries to a crystal-clear, non-yellowing finish. Can be colored by mixing in enamel paint to achieve the desired water effect (such as muddy water, puddles, ocean water, etc.) Works with any scale. (former model #SC0011). Photo of product used to create a waterfall & another depicting
splashing water: Temporarily out of stock |
$15.00
|
 |
| SC0006 | Melting Water Effect. Set contains 100 ml
bottle of special wax, measuring cup, sppon, instructions. Melts at
140F. Non-toxic. Dried surface can be painted (sets to a clear
finish).
Add a few drops of dishwashing liquid to make a bubbling water effect: |
Not yet available |  |
<-Back to Scalerama Index Page
Back to Groundwork & Diorama Aids Index
