Diorama Accessories:

Tiger Productions 

1/35 Scale diorama accessories - Made in USA 

Back to Groundwork & Diorama Aids Index

<-Go back to scenic figure bases index page

  

Model

Description Price Photo
TI-SA35001 Italian house section with door 1/35 scale resin kit (wall measures 2-3/16 inches wide X 5-3/8 inches high at its peak.  Base measures 2-3/16 inches wide X 4-1/8 inches deep with wall mounted.  Base is stone sidewalk section with curb attached to cobblestone street section. $14.00

SA35001.jpg (37867 bytes)
TI-SA35002 French house ruin section with cobblestone base 1/35 scale resin kit.  Assembled measurements: 4-13/16 inches high X 2-3/16 inches wide X 4-1/8 inches deep. $14.00

SA35002.jpg (31234 bytes)
TI-SA35005 Wooden beam house corner section & cobblestone base (Europe) 1/35 scale resin kit.  Assembled measurements: sidewalk/street base is 4-3/4" wide by 4-1/2 inches deep.  House section is about 4-3/4 inches high. $14.00

SA35005.jpg (42038 bytes)
TI-SA35006 Window on brick wall 1/35 scale resin kit.  Measures 2-1/4 inches wide x 3-3/8 inches high $10.00

SA35006.jpg (40544 bytes)
TI-SA35010 Gothic church window & large brick base 1/35 scale resin kit.  Base measures 2-7/8 inches wide X 2-3/4 inches deep.  Wall measures 2-7/8 inches wide by 4-3/4 inches height (when assembled). $14.00

SA35010.jpg (41102 bytes)
TI-SA35011 Large gate, one sided 1/35 scale resin kit.  Measures 4-7/8 inches high X 2-1/2 inches wide (at very top) $10.00

SA35011.jpg (33894 bytes)
TI-SA35017 Large Gothic porch 1/35 scale resin kit (floor measures 4 inches wide X 3.5 inches deep.  Pillared section in rear measures about 5-3/8 inches when assembled). $25.00

SA35017.jpg (40455 bytes)
TI-0090 Side walk & corner figure base 1/35 scale resin kit (also compatible with 54 mm), size is three inches X three inches $5.00

TI-090.jpg (34722 bytes)
TI-0111 Trench section figure display base1/35 scale resin kit (also compatible with 54 mm).  Base measures 3-9/16 inches wide by 2-7/8 inches deep.  Wall section measures 3-9/16 inches wide by 2-7/8 inches high. $13.00

TI-0111.jpg (39615 bytes)
TI-0113 "The Corner" small stucco & wood trim building corner with window & half door.  Includes side walk area with great cobblestone detail.  1/35 scale resin kit (also compatible with 54 mm).  Base measures 2-7/8 inches square.  building is 3-7/16 inches high when assembled. $15.00

TI-0113.jpg (40809 bytes)

Back to Groundwork & Diorama Aids Index

<-Go back to scenic figure bases index page

Back to Home Page

Hit Counter